|
Home
| Engineering Openings | New Products | Motors
| Air Movers | About Ashland | Contact Us
MIL-I-45208A
MIL-Q-9858A
| Ashland blowers and fans for high performance
commercial, industrial, and military applications are available in various voltages,
frequencies and phases. Ashland air movers provide superior performance, extended
operating life with minimum noise. |
|
Centrifugal Blowers |
| Designed for high reliability, maintenance free operation, Ashland
centrifugal blowers are available in single, duplex, and inverted designs and provide high
volumes of air at moderate static pressure. Typical applications include cooling of
electronics and communications equipment, cooling of television, radio and satellite
broadcasting transmitters, air circulation for cooling, heating and scavenging. |
|
Vaneaxial Fans |
Ashland vaneaxials provide high volumes of air at very
high static pressure. Aerodynamically shaped impeller blades and straightening vanes
reduce air disturbances and result in higher pressure, increased efficiency and lower
noise levels. Typical applications include electronics cooling with high air
resistance or static pressure, requirements involving high heat load dissipation,
environmental cooling and air circulation. |
|
|
|
Propeller Fans |
Ashland propeller fans are compact, lightweight, self contained units, and deliver
relatively high volumes of air against low static pressure. Typical applications
include flushing, circulating cooling air in electronics enclosures, instrument panels and
communications equipment in ground based, aircraft and shipboard applications.
|
|
Axial Fans |
Efficient airfoil blades, close tip clearance and clean
airflow pattern provide higher pressure than the conventional propeller fan. Ashland
combines these features with its motor design to produce tubeaxial fans with high
performance and efficiency at low noise levels. Typical applications include
circulating air for cooling or heating, heat exchangers, and electronic enclosures
requiring high volumes of air at intermediate static pressure. |
|
|
|
Multi Stage Blowers |
Multi stage blowers produce very high static pressure or vacuum in relation to size and
speed. Typical applications include computer peripherals, tape drives, material
handling equipment, air sampling, and pressure and vacuum systems. |
|
|
Tangential
- Cross Flow Blowers |
|
| These blowers are designed to provide a wide uniform high CFM output at
low static pressures with extremely compact blower height and depth. Typical
applications are electronic cooling, exhausters, ventilators and air curtains of all
types. |
|
Home
| Engineering Openings | New Products | Motors
| Air Movers | About Ashland | Contact Us
|
